Micro SD CardDon’t lose any records with micro SD card up to 32 GB! FMB630 will store all data in micro SD card when driving in areas where 3G/GSM is not available.
Integrated Tachographenables remote tachograph file (DDD, V1B, C1B or TGD format) download and live tachograph info acquisition without any additional adapter. Easier than ever connection – less integration time.
RS232/RS485RS232/RS485 functionality enables connection of third party devices like: multiple LLS sensors, GARMIN personal navigation device, RFID readers or some other RS232/RS485 devices.
GNSS Antenna Disconnection DetectionGNSS antenna disconnection detection will monitor the state of GNSS antenna. If any person cuts or disconnects the antenna, You will be immediately informed about such action.
MVC300 – Online PhotosOnline photo solution allows to receive photo to server from your fleet management devices. FM6320 device 3G feature allows to receive photo in less than 1 minute after event.
J1708 CAN SupportRead fuel data from heavy duty vehicles, from which fuel data reading was not possible before. J1708 CAN protocol ensures fuel data reading from Volvo and Renault heavy duty vehicles.
|GNSS||GPS, GLONASS and Galileo signals|
|3G||Gives wide area of coverage!|
|SMS||Text message enabled|
|GPRS||Technology based on 2G and 3G.|
|2X SIM Card (Dual-SIM)||Allows to put 2 SIM cards (can be from different operators) for internet connection|
|IP41||Protected from tools and small wires, condensation.|
|Memory||1MB storage memory for data storage where there is no GPRS connectivity|
|Internal GSM antenna||Used for GSM connectivity|
|Internal GNSS antenna||Used for GNSS/GPS connectivity|
|Battery||170mAh Li-ion 3,7V|
|Voltage Range||10 - 30V|
|Over-voltage Protection||Protects the device against volatage jumps until 90V|
|Fuel tracking||Helps to monitor the fuel flow in the vehicle and transmit the dedicated data to the server.|
|Fuel monitoring LLS (Analog)||Measure the fuel level in the vehicle accurate using LLS!|
|Ignition Detection||Based on a configured ignition source (External power voltage, Digital input 1 or Movement).|
|Geofence||A functionality, which generates an event when crossing a defined area. More Details..|